The M210T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The M210T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The M210T Ethernet Remote I/O module provides 4 optical-isolated digital inputs, supports max. 700KHz high speed pulse counter. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Specifications:

Ethernet Remote I/O Module Specifications
• Digital Input
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND=1 • Off: open=0
Wet Contact (DI to COM)	• On: 10 to 30 VDC=1  • Off: 0 to 3 VDC=0
Counter Frequency	Max. 700Khz (Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency	500Hz
Digital filtering strategy	Continues 3 times
Isolation	Optical Isolated,3k VDC or 2k Vrms
• Working Power Requirements
Input Voltage	12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;
Input Current	139 mA @ 24 VDC
• Power Output
Output Voltage	12 to 36 VDC
Output Current	139 mA @ 24 VDC
• LAN
Ethernet	10/100 Mbps, RJ45 ports
Protection	15KV ESD Protection
Protocols	Modbus TCP, TCP/IP
Max. TCP Connection	5
• Serial Port
RS485	MODBUS- RTU Protocol, Modbus-ASCII Protocol
Protection	15KV ESD Protection
Modbus Slave address	1~255
Baud Rate	1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers	Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	105 x 88 x 30 mm
Weight	Under 205 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 3000 m

 

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;

2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;

3. Management and configuration via LAN connection configuration software for easy operation and maintenance;

4. Support Web realtime monitoring and Web debugging;  

5. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;

6. 4 optical isolated digital input, supports max. 700khz high speed pulse counter;

7. High sampling frequency and special filtering strategy to ensure reliability;

8. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;

9. Supports register mapping function and extend I/O inquiry strategy;

10.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;

11.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;

12.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;

13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.